Arpad-Agrar

The heat source is thermal water from hot springs. To further reduce dust, the dryer is equipped with TORNUM Clean Air Control, CAC, instead of traditional fans.

  • Country: Hungary
  • Category: Industrial
  • Type: Dryer
  • Status: Completed
Follow a project
Continuous dryer TK6-22-4. The heat source is thermal water from hot springs.
Continuous dryer TK6-22-4. The heat source is thermal water from hot springs.
2012-03-08
Inspection of the construction site.
2012-03-08 Inspection of the construction site.
2012-03-08
First delivery from Sweden. Everything is properly packed and without transport damage.
2012-03-08 First delivery from Sweden. Everything is properly packed and without transport damage.
2012-04-04
While the ground work proceed, the archaeological exploration of the area is ongoing
2012-04-04 While the ground work proceed, the archaeological exploration of the area is ongoing
2012-04-04
The dryer sections are pre-mounted on the ground and are ready to be lifted together.
2012-04-04 The dryer sections are pre-mounted on the ground and are ready to be lifted together.
2012-04-04
The dryer sections are pre-mounted on the ground and are ready to be lifted together.
2012-04-04 The dryer sections are pre-mounted on the ground and are ready to be lifted together.
2012-04-04
The construction site from above .
2012-04-04 The construction site from above .
2012-04-04
Pre-mounted discharge section 6x2 meters.
2012-04-04 Pre-mounted discharge section 6x2 meters.
2012-04-04
The crane is in place to lift the drying sections.
2012-04-04 The crane is in place to lift the drying sections.
2012-04-04
The crane is in place to lift the drying sections.
2012-04-04 The crane is in place to lift the drying sections.
2012-04-04
The crane is in place to lift the drying sections.
2012-04-04 The crane is in place to lift the drying sections.
2012-04-04
The crane is in place to lift the drying sections.
2012-04-04 The crane is in place to lift the drying sections.
2012-04-04
The crane is in place to lift the drying sections.
2012-04-04 The crane is in place to lift the drying sections.
2012-04-04
The crane is in place to lift the drying sections.
2012-04-04 The crane is in place to lift the drying sections.
2012-04-04
The bulk loadin gbins are also pre-assembled on ground.
2012-04-04 The bulk loadin gbins are also pre-assembled on ground.
2012-05-10
The construction site today.
2012-05-10 The construction site today.
2012-05-16
The dryer is assembled.
2012-05-16 The dryer is assembled.
2012-05-16
There is still some installation that needs to be done inside the dryer.
2012-05-16 There is still some installation that needs to be done inside the dryer.
2012-05-16
It is tight between the drying laterals.
2012-05-16 It is tight between the drying laterals.
2012-05-16
CAC, Clean Air Control is ready to be mounted on the dryer.
2012-05-16 CAC, Clean Air Control is ready to be mounted on the dryer.
2015-05-16
Heat exchanger for the thermal water has been mounted on the dryer.
2015-05-16 Heat exchanger for the thermal water has been mounted on the dryer.
2015-05-16
Robust ladders with safety hoppers  and platforms for a safe working environment.
2015-05-16 Robust ladders with safety hoppers and platforms for a safe working environment.
2012-07-10
9 CACs will reduce the dust.
2012-07-10 9 CACs will reduce the dust.
2012-07-10
Cleaning the site.
2012-07-10 Cleaning the site.
2012-07-10
The dryer seen from the side.
2012-07-10 The dryer seen from the side.
2012-07-15
Everything is ready to be put into operation!
2012-07-15 Everything is ready to be put into operation!

Related products

Sales contacts

Don't hesitate to contact Tornum or your closest Tornum distributor.